Mechanical Engineering



RESEARCH & CONSULTANCY

The Department Mechanical Engineering is recognized as a Research Centre by Anna University Chennai, for carrying out collaborative research work. The Centre for Research and Consultancy has been established to promote research culture and to give motivation to Sponsored research and consultancy activities in addition to the academic research. Sponsored research projects investigated by the faculty and supported by various government and research organizations have helped the Institute in procuring state of the art instruments and equipment necessary for carrying out high quality research. Research projects of academic nature as well as those aimed at solving industrial problems are being pursued.



FUNDED & SPONSORED PROJECTS

SI.NO TITLE OF THE RESEARCH SPONSORING AGENCY AMOUNT(RS) STATUS
1 FULLY AUTOMATIC INSTANT DOSA FOR HOUSEHOLD IEDC 1,00,000/- ONGOING
2 RESCUE ROBOT MSME 6,00,000/- COMPLETED
3 AGRO KART IEDC 4,57,000/- COMPLETED


PUBLICATIONS

INTERNATIONAL JOURNALS
    1. A.Thanikasalam and N. Arunkumar, Effect of Process Parameters on Surface Roughness and Roundness Error for Deep-hole Drilling of AISI 1045 Steel, International Journal of Printing, Packaging & Allied Sciences, Vol. 4, No. 5, December 2016.
    2. Vivekanandhan P, Anand S, Thanikasalam A, Investigation on wear resistance of varying load of particulate lignite fly ash reinforced aluminium alloy 6063 composites, International Journal of Emerging Technology and Advanced Engineering (ISSN 2250–2459, ISO 9001:2008 Certified Journal, Volume 2, Issue 9 (IJETAE/Volume2/Issue9/22; September 23, 2012).
    3. Siddhartha D, Sidique Ahmed, VijayaRamanath, Ramanan N, “Wear analysis of Sintered Al-B4Cp Composite Material“. (Accepted for publishing through International Conference on Advances in Materials, Manufacturing and Applied Sciences).
    4. Siddique, Vijay VijayaRamanath, Boopathy,Siddhartha D, Ramana N, “Analysis of The Friction Welding Mechanism Of Low Carbon Steel –Stainless Steel And Aluminium – Copper”, (Accepted for publishing through International Conference on Advances in Materials, Manufacturing and Applied Sciences).
    5. V. Raja, P. Periyasamy, V. Mohanavel, D. Siddhartha, N. Ramanan, A. Ramesh Udhayakumar, V. Ranjith Kumar, “Friction Welding of Dissimilar Material – An Overview”. (Accepted for publishing through International Conference on Advances in Materials, Manufacturing and Applied Sciences).
    6. V.Mohanavel, P. Gopi, D. Siddhartha, O. Maniyarasu, V. Karthi, S. Karthikeyan, N. Ramanan, “Analysis Of Mechanical And Metallurgical Properties Of Al-Sio2 Composite Material”, (Accepted for publishing through International Conference on Recent Advances in Mechanical Engineering).
    7. V.Mohanavel, N. Ramanan, P. Gopi, O. Maniyarasu, D. Siddhartha, V. Karthi, S. Karthikeyan, V. Ranjith Kumar, “Comparison of The Friction Welding Mechanisms In Welding Of Low Carbon Steel –Stainless Steel And Aluminium With Copper”. (Accepted for publishing through International Conference on Recent Advances in Mechanical Engineering).
    8. Selvanthan k “Numerical studies on laser welded top hat column under axial collision based on the concepts of super folding elements” (IJCR) Accepted on 2015.
    9. Selvanthan k Optimization of noise less, non lubricated helical gear pair using fire fly algorithm (IJEECSE) .
    10. R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Single Cylinder Diesel Engine Using Jatropha oil with Supercharger”. International Journal for Scientific Research & Development, 2013, vol 1, Issue 10 pg 2130-2133.
    11. “R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Single Cylinder Diesel Engine Using Jatropha oil with EGR”. International Journal of Science, Engineering and Technology Research 2014, vol 3, Issue 1 pg 14-18.
    12. .“R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Diesel Engine Using Jatropha oil with Super Charger and EGR”.International Journal of Emerging Technology and Advanced Engineering. 2014, vol 4, Issue 1, pg128-134.
    13. Mr. P. Naveen Kumar AP/ Mech has published a paper in ELSEVIER in a title of “ Experimental investigation on the effect of water mass in triangular pyramid solar still integrated to inclined solar still” Accepted on 15.07. 17.
    14. Mr. P. Naveen Kumar AP/Mech has published a paper in TAYLOR & FRANCIS in a title of “ Economic and exergy investigation of triangular pyramid solar still integrated to in integrated to inclined solar still” Accepted on 23.12. 17.
    15. Mohammed Abdul Kadar R, “An Improvement in the Machining Process Performance of the Grinding Wheel by Increasing Number of Passes” paper published in IEEE eXpress Plus Explore – Jan 2018, Vol. 12.
    16. Ramesh Udhayakumar, P.Gopi,Ramanan N, Karthi.V, “Analysis of Mechanical and Metallurgical Properties of Al-Fly ash Composite Materials,” International Research Journal of Engineering Technology,Vol.4,Issue 7, July 2017.(ISO 9001-2008 Certified Journal).
    17. V.Mohanavel, P. Gopi, D. Siddhartha, O. Maniyarasu, V. Karthi, S. Karthikeyan, N. Ramanan, “Analysis Of Mechanical And Metallurgical Properties Of Al-Sio2 Composite Material”, (Accepted for publishing through International Conference on Recent Advances in Mechanical Engineering).
    18. V.Mohanavel, N. Ramanan, P. Gopi, O. Maniyarasu, D. Siddhartha, V. Karthi, S. Karthikeyan, V. Ranjith Kumar, “Comparison of The Friction Welding Mechanisms In Welding Of Low Carbon Steel –Stainless Steel And Aluminium With Copper”. (Accepted for publishing through International Conference on Recent Advances in Mechanical Engineering).
    19. Elanchezhian J, Pradeep Kumar M, G Manimaran. “Grinding titanium Ti-6Al-4V alloy with electroplated cubic boron nitride wheel under cryogenic cooling” is published in Journal of Mechanical Science and Technology –Springer November 2015, Volume 29, Issue 11, pp 4885–4890.
    20. Elanchezhian J, Arul. K, A.Thanikasalam, A. Adhinarayanan. “Numerical Simulation of Crack Growth Using Extended Finite Element Method” is published in International Journal of Advance Engineering and Research 2 (3) 2015 582-589.
    21. Arul.K, Manoj.T, Thanikasalam.A, Elanchezhian.J “investigation of squeeze casting on metal matrix composite [al-sic (p) reinforced]” is published in International Journal of Advance Engineering and Research 2 (3) 2015 390-396.
    22. Presented a Journal on “Mechanical Behavior of Al-SiC Composites Prepared By Stir Casting Method” ” in International Journal of Innovative Research in science, Engineering and Technology,Vol. 3, Issue 3, March 2014.
    23. Presented a Journal on “Analysing the Characterisation of AlkaliTreated Coir Fibre Composites” in International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2, Issue 10, October 2013.
    24. Presented a Journal on “Flow Induced Vibration Integrated Design of Exhaust Manifold System for Dual Valve Engine” in International Journal of Innovative Research in Science, Engineering and Technology, vol.5, Special Issue 4, March 2016.
    25. Udayakumar N, "Characterization of Nylon 6 Nanofiber/ E-Glass fiber Reinforced Epoxy composites" In IOP Scicene 2017.
    26. Udayakumar N, “Mechanical Properties Analysis of Nylon-6 Nano Fiber / E-Glass Fiber Reinforced Epoxy Composites” International Journal of Science and Innovative Engineering & Technology (IJSIET) 2016.


NATIONAL JOURNALS
    1. D.Siddhartha, Dr.K.S.Amirthagadeswaran, B.Athiyaman, A.Parthiban “Experimental and numerical analysis of the thermal performance of Aluminium,Copper and Brass alloy radiators“, Journal of Emerging Technology in Mechanicalsciences and Engineering, ISSN No.: 0976-2558 Special issue - 1 Volume – 4 pg.no.16-22, 2013.
    2. G.Boopathy, A.RameshUdhayakumar, Siddhartha D, Ramanan N, “Impact ananlysis of kenaffibre reinforced composite”, Journal of Chemical and Pharmaceutical Sciences, ISSN No. 0974- 2115, Special Issue 2: February 2017.
    3. Ramesh Udhayakumar A, Siddhartha D, Sethu Raman A, Ramanan N, Karthi V, “Modeling and Analysis of Lower wishbone for independent suspension system for commercial vehicles”, Journal of Chemical and Pharmaceutical Sciences, ISSN No. 0974- 2115, Special Issue 2: February 2017.
    4. “R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Diesel Engine Using Jatropha oil with Super Charger” Journal of Chemical and Pharmaceutical Sciences.2015, Special Issue 1 pg 138-141.


INTERNATIONAL CONFERENCES
    1. Siddhartha D, Sidique Ahmed, VijayaRamanath, Ramanan N, “Wear analysis of Sintered Al-B4Cp Composite Material“, International Conference on Advances in Materials, Manufacturing and Applied Sciences, March, 2017 at Sri Sairam Engineering College, Chennai.
    2. Siddique, Vijay VijayaRamanath, Boopathy,Siddhartha D, Ramana N, “Analysis of The Friction Welding Mechanism Of Low Carbon Steel –Stainless Steel And Aluminium – Copper”, International Conference on Advances in Materials, Manufacturing and Applied Sciences, March, 2017 at Sri Sairam Engineering College, Chennai.
    3. V. Raja, P. Periyasamy, V. Mohanavel, D. Siddhartha, N. Ramanan, A. Ramesh Udhayakumar, V. Ranjith Kumar, “Friction Welding of Dissimilar Material – An Overview, International Conference on "Recent Advances in Mechanical Engineering", September 2017 at Kingston Engineering College, Vellore.
    4. V.Mohanavel, P. Gopi, D. Siddhartha, O. Maniyarasu, V. Karthi, S. Karthikeyan, N. Ramanan, “Analysis Of Mechanical And Metallurgical Properties Of Al-Sio2 Composite Material”, International Conference on "Recent Advances in Mechanical Engineering", September 2017 at Kingston Engineering College, Vellore.
    5. V.Mohanavel, N. Ramanan, P. Gopi, O. Maniyarasu, D. Siddhartha, V. Karthi, S. Karthikeyan, V. Ranjith Kumar, “Comparison of The Friction Welding Mechanisms In Welding Of Low Carbon Steel –Stainless Steel And Aluminium With Copper”, International Conference on Recent Advances in Mechanical Engineering, September 2017 at Kingston Engineering College, Vellore.
    6. Selvanthan k organized by ”confederation of Indian industries and tamilnadu industrial development corporation ltd “ at Hotel ITC grand chola manufacturing technology.
    7. “R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Diesel Engine Using Jatropha oil with Super Charger and EGR” International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments , at Ponjesly College of Engineering, Nagercoil, on 7-8 March 2014.
    8. Presented a Paper with entitled “NUMERICAL EVALUATION OF FRACTURE CHRACTERISTICS OF MICRO-SIZED PARTICLE FILLED POLYMER COMPOSITES”in International conference on Scientific Research of Engineering and Technology(ICSRET 2017).
    9. Udayakumar N, “Mechanical Properties Analysis of Nylon-6 Nano Fiber / E-Glass Fiber Reinforced Epoxy Composites” International Journal of Science and Innovative Engineering & Technology (IJSIET) 2016.
    10. Mohammed Abdul Kadar R, “Design and Modification of Railroad Ballast Distribution System in the Railroad Ballast Cleaning Machine” Paper Presented in “6th International & 27th All India Manufacturing Technology, Design and Research Conference, AIMTDR – 2016, Pune.
    11. Mohammed Abdul Kadar R, “An Improvement in the Machining Process Performance of the Grinding Wheel by Increasing Number of Passes” Paper Presented in the “IEEE Conference – 2018, Vellore”.
    12. Attended ICMED17 at SSN college of engineering and published the paper titled on “Experimental investigation and Process Optimization on Aluminum Alloy AA6061.
    13. V.Mohanavel, P. Gopi, D. Siddhartha, O. Maniyarasu, V. Karthi, S. Karthikeyan, N. Ramanan, “Analysis Of Mechanical And Metallurgical Properties Of Al-Sio2 Composite Material”, International Conference on "Recent Advances in Mechanical Engineering", September 2017 at Kingston Engineering College, Vellore.
    14. V.Mohanavel, N. Ramanan, P. Gopi, O. Maniyarasu, D. Siddhartha, V. Karthi, S. Karthikeyan, V. Ranjith Kumar, “Comparison of The Friction Welding Mechanisms In Welding Of Low Carbon Steel –Stainless Steel And Aluminium With Copper”, International Conference on Recent Advances in Mechanical Engineering, September 2017 at Kingston Engineering College, Vellore.
    15. Elanchezhian J, Arul. K and AniruthanM.E“Numerical Simulation of Crack Growth Using Extended Finite Element Method” International Conference on Trends In Technology for Convergence “TITCON-2014” held on 8th& 9th April 2014., organized by AVS Engineering College.


NATIONAL CONFERENCES
    1. Balamurugan M Presented a paper on “Performance Analyzers of Automobile Air-conditioning System at Different Charge Level” in the one day National Conference on Emerging trends in Thermal ,Industrial and Manufacturing (e-TIME’13) organized by the Department of Mechanical Engineering held at Karpagam College of Engineering on 15th March 2013.
    2. Thanikasalam A has presented A Comparative Study on the Mechanical Properties of Natural Fiber Reinforced Polymer Matrix Composites on 10 – 11, December 2012 College of Engineering, Pune, India.
    3. Elanchezhian J and Dr.Pradeep Kumar M."Implementation of Lean Manufacturing Methodology in air Pre Heater Component", National Conference on Recent Trends in Manufacturing Technology (RTMT-2011) on 11th& 12th March 2011 at Department of Manufacturing Engineering , College of Engineering Guindy Campus , Anna University, Chennai-600 025 ,pp 27-31.
    4. Pradeep.p, Arul. K, Elanchezhian J “Performance Evaluation in Wire Electrical Discharge Machining (WEDM) of Brass”, National Conference on NCRTDAM 2014 at Department of Manufacturing Engineering, S.A.Engineering College, Chennai.
    5. Elanchezhian J, Arul. K and Manoj T “ Investigation of Squeeze Casting on Metal Matrix Composite (AL-sic) Reinforced” National Conference on Current Trends in Manufacturing, Electrical, Electronics and Computing held(NCMEEC-2014) on 28th Feb-2014, organized by SaraswathiVelu College of Engineering.
    6. Selva Raja A., Elanchezhian J., Pradeep Kumar M. “Optimization of Cryogenic Grinding Process Parameters using the application of Grey Relation”National Conference on Recent Trends in Manufacturing Technology (RTMT-2015)on 16th& 17thApril 2015 at Department of Manufacturing Engineering , College of Engineering Guindy Campus , Anna University, Chennai-600 025.
    7. P.Gopi ,K.S. Vijay Sekar, Dr.M. Pradeep Kumar ,T.Jeyapoovan “Finite element analysis of the orthogonal metal cutting process using AA 6082(T6) with two flow stress models”National Conference on Emerging Trends in Engineering & Technology (NCETET-2008) During 4th and 5th of April 2008 at Rajarajeswari Engineering College Chennai.
    8. P.Gopi Attended Innovate India 2015 Conference on “Make in India:Opportunities Through Innovation” during 25-26 February 2015 at PSG College of Technology, Coimbatore.
    9. Murali P, “Performance Evaluation On The Effects Of Aluminium Oxide Nanoparticles On Biodiesel”, atK.L.N.C.IT, Sivagangai, in 2016
    10. Murali P, “Modeling and Finite Element Analysis of Die for Fuel Delivery Pipe at Dr.Mahalingam College of Engineering and Technology, Pollachi, in 2005.
    11. Rajkumar.R Presented a Paper with entitled “OPTIMIZATION OF DRILL BIT MATERIAL, FEED RATE AND CUTTING SPEED TO AVOID DELAMINATION DURING DRILLING OF COMPOSITE MATERIAL” in National conference on Recent Advances in Materials andManufacturing Engineering (RAMM 2014).
    12. R.Selvan, Dr.K.Maniysundar”,Jathropha an Alternate Fuel for Diesel Engine, National Conference on Mechanical Engineering Trends, at Ballari Institute of Tech and Managament, Bellary, Karnataka, on 19-20 Feb 2010.
    13. 2. R.Selvan, Dr.K.Maniysundar”, “Performance and Emission Analysis of Diesel Engine Using Jatropha oil with Super Charger ” National Conference on Recent Trends and Developments in Sustainable Green Technologies, at Madras Institute of Technology, Chennai, on 24-25 March 2015.
    14. Siddhartha D, “Design and Fabrication of Solar Dehydrator”, National Conference on Emerging Trends in Design and Manufacturing at Saveetha Engineering College, 2011.


FINAL YEAR - A SECTION (2017-18)

Batch Register No. Student Name Title Project Guide Domain Venue
1 310114114312 C.Saravanan AIR BRAKING USING EXHAUST GAS Mr.RAKESH Hydraulic Industry
310114114024 V Dilli Ganesh
310114114317 V.Vijay
2 310114114048 K.Mariselvam CFD ANALYSIS OF AUTOMOBILE MUFFLER Mr.V.SEKAR Analysis College
310114114051 R.N.Monishwar
310114114052 J.Murali Krishnan
310114114054 K.Naveen Kumar
3 310114114301 R.Ashik AUTOMATIC THROTTLE CONTROL IN TRAFFIC & SCHOOL ZONE Mr.V.SEKAR Automation College
310114114307 N.Kantharuban
310114114055 P.Naveen
310114114313 Sarukhan
4 310114114033 A.Jayanth DESIGN & DEVELOPMENT OF HYDRAULIC FOURTH AXIS FIXTURE Mr.A.SETHURAMAN Manufacturing Industry
310114114037 S.Kaushik
310114114039 K.Kumaravel
5 310114114005 L.Ajith kumar SOLAR AIR CONDITIONING-AUTOMOBLIE Mr.H.KUMAR Energy College
310114114008 Antony Richard
310114114015 R.Ashwin Suraj
310114114022 Bineeth
6 310114114047 R.Manoj DESIGN & ANALYSIS OF 'COOL WEAR - AN HEAT EXCHANGER' USING COMPUTATIONAL FLUID DYNAMICS Mr.A.THANIKASALAM Thermal College
7 310114114038 R.Kishore kumar ESTIMATION OF PROPORTION OF CORE FLOW ENTERING THE CONTROL PLUG IN A FAST BREEDER REACTOR USING CFD Mr.A.THANIKASALAM Thermal Industry
8 310114114004 G.Ajay krishnan SOLAR WATER PURIFIER Mr.S.SATISH KUMAR Energy College
310114114006 S.Allan paul
310114114007 P.S.Anirudh
310114114010 S.Aravind
9 310114114013 K.Arun kumar RUN OVER PRECLUDER Mr.K.SELVANATHAN Manufacturing College
310114114042 V.Manibalan
310114114043 R.Manikandan
10 310114114028 V.T.Gokul gandhi VIBRATION ANALYSIS OF DYNAMIC EQUIPMENTS BY USING FFT & MAT LAB Mr.KUMAR Analysis Industry
310114114034 P.Joshua Ebenezer
310114114310 N.Muthukrishnan
11 310114114009 R.Arvindh kumar DESIGN & ANALYSIS OF HIGH EFFICIENT SOLAR PANEL Dr.R.SELVAN Analysis College
310114114017 N. Athavan vaiyathiral
310114114019 K.Baalamurugan
310114114303 G.Gajaraj
12 310114114002 S.ABINESH DESIGN OF A CAR DOOR WINDOW REGULATOR Mr.SATHISH KUMAR Automation Industry
13 310114114020 M.Balaji venkatesh DESIGN & ANALYSIS OF COMPOSITE LEAF SPRING Mr.RAKESH Analysis College
310114114021 J.R.Bharadeep rishivanth
310114114053 J.Murugaraj
14 310114114045 K.Manimaran DISC ASSEMBLY FREE PLAY ANALYSIS ON DAMPER TECHNOLOGIES IN CLUTCH Mr.P.NAVEEN KUMAR Analysis Industry
15 310114114031 W.Hudson Arunodhayan COMPUTATIONAL INVESTIGATION OF HEAT TRANSFER CO EFFICIENT IN AUTOMOBILE RADIATOR WITH DIFFERENT SHAPED RIBS Mr.P.NAVEEN KUMAR Thermal College
310114114035 M.Karthick
310114114023 G.Dhivakar
310114114036 L.Karthik
16 310114114041 N.Magesh AUTOMATIC FUEL FEEDING COOK STOVE WITH EMISSION CONTROL Mr.SATHISH KUMAR Automation College
310114114044 B.Manimaran
310114114046 R.Manish kumar
310114114049 R.Mohan
17 310114114026 K.Diwakar FABRICATION OF MINI CNC MACHINE USING ARDUINO SYSTEM Mr.MURALI Manufacturing College
310114114029 R.Gunaseelan
310114114025 S.Diwakaran
310114114016 K.S.Ashwin
18 310114114040 D.Madhu naik DESIGN MODELLING & ANALYSIS OF 5 TONNE CRANE HOIST Dr.R.SELVAN Analysis Industry
19 310114114316 K.Vignesh DESIGN AND ANALYSIS OF FATIQUE FAILURE IN FRONT SUSPENSION FORKS IN MOTORBIKES Mr. C.GUHAN Analysis College
310114114050 S.Mohan
310114114018 Athisram
310114114003 Adheek akthar
20 310114114032 B.Jagdeesh CATALYTIC CONVERTER Mr.V.SEKAR Automation College
310114114001 A.Abinash
21 310114114030 R.Harish kumar PROPERTIES OF SINTERED ALUMINIUM ALLOY POWDER FOR AUTOMOBILE APPLICATION Mr. C.GUHAN Manufacturing College
310114114014 S.Arun
310114114011 J.Arul prakash
310114114027 D.Gnanaprakash


FINAL YEAR - B SECTION (2017-18)

SI No Register No. Student Name Title of the Project Project Guide Domain Venue
1 310114114067 Rahul babu.V.R CAR CONTROL USING EMC JOYSTICK Mr. P.GOPI Automation College
310114114085 Siddarth.Y
310114114087 Sri krishnan.D
310114114092 Suriya dev.K
2 310114114102 Vijay harish.K.S FEA ANALYSIS & IMPLEMENTATION OF COMPOSITE PISTON Mr. M.BALA MURUGAN Analysis College
310114114302 Bala chandran.N
310114114305 Gnanasekar.K
310114114308 Kishore.S.V
3 310114114097 Venkatesapriyan.K OPTIMIZATION OF MACHINING PARAMETERS IN WIRE - CUT ELECTRICAL DISCHARGE MACHINE Mr.V.SEKAR Analysis College
310114114098 Vignesh.P
310114114318 Visvam.C
4 310114114099 Vignesh.R ANALYSIS OF FUTURISTIC ROAD Mr. P.GOPI Analysis College
310114114101 Vigneshwaran.V
310114114107 Vivek.K
310114114304 Giridharabalaji.V.V
5 310114114086 Sridharan.N DRY MACHINING OF DUPLEX STAINLESS STEEL BY USING COATED CARBIDE TOOL Mr. A.THANIKASALAM Manufacturing College
310114114090 Sunil kumar.P
310114114093 Surya.S
310114114701 Jawahar.P
6 310114114057 Nithiyanandham.E PERFOMANCE ANALYSIS, MODELLING AND EXPERIMENTAL VERIFICATION OF SPEEDOMETER GEAR SETUP USING WIRE – CUT EDM Mr. Md.ABDUL KADAR Analysis College
310114114061 Prabhagaran.K
310114114066 Punnaivanam.R
310114114105 Vinith kumar.M
7 310114114082 Selvaganapathy.K SAFETY DOORLOCK SYSTEM USING LIDAR Mr. H.KUMAR Mechatronics College
310114114083 Sharath ramalingam.S
310114114103 Vikraman.V
310114114108 Yogeshwaran.V.S
8 310114114088 Stephen immanuel.M.G AUTOMATIC ACCIDENT ALERT SYSTEM Mr. C.GUHAN Mechatronics College
310114114089 Subramani.P
310114114094 Tamilselvan.J
310114114096 Vasantha kumar.M
9 310114114095 Tamilselvan.V IMPLEMENTATION OF SIX SIGMA IN WELDING Mr. G.RAKESH Manufacturing Industry
310114114100 Vignesh.R
310114114109 Yuvaraj.V
310114114311 Muthuraj.T
10 310114114065 Priyadharshini.S INVESTIGATION OF TEMPERATURE DISTRIBUTION OF SODIUM IN SECONDARY SODIUM TANK DURING MELTING AT IGCAR Mr. P.MURALI Thermal Industry
11 310114114067 Parthiban.S PERFORMANCE ANALYSIS BETWEEN MANUAL TRANSMISSION AND CVT Mr. P.MURALI Automation College
310114114067 Ranjith.M
310114114067 Surendar.S
310114114067 Gowthaman.J
12 310114114068 Raj kumar.R FIBRE METAL LAMINATION (FML) IN AEROSPACE APPLICATIONS Mr. A.SETHURAMAN Manufacturing College
310114114072 Ravichandar.M
310114114078 Sankaran.S
310114114106 Vinoth kumar.B
13 310114114060 Poovarasan.P DESIGN AND ANALYSIS OF ATV SYSTEM Mr. A.THANIKASALAM Automation College
310114114064 Priyadharshan.P
310114114084 Sharif.K.S
14 310114114067 Prakash.S DESIGN AND ANALYSIS OF ATV SUSPENSION SYSTEM Mr. R.RAJKUMAR Automation College
310114114067 Praveen.K
310114114067 Saravanaprakash.R
310114114067 Venkatesan.N.V
15 310114114070 Ram kumar.G DESIGN AND EVALUATION OF REFRIGERATOR USING PELTIER EFFECT Mr. R.RAJKUMAR Thermal College
310114114073 Richard maria levin.J
310114114074 Rudresh.S
310114114075 Sabarinathan.K
16 310114114080 Sasidharan.U DESIGN OF PERSONAL UTILITY CART Mr. R.RAJKUMAR Design College
310114114081 Sathish.R
310114114104 Vinith kumar.A
17 310114114056 NISHA.R PROCESS DEVELOPMENT IN CAR WALL ASSEMBLY Mr. A.THANIKASALAM Process development Industry
310114114058 Salman.A
310114114069 Novaraj.J
310114114077 Rakesh.K

© 2018 AIHT. All rights reserved.